Table of Contents
ParTrend - change a parameter over a range and monitor another parameter
ParTrend <dbman_host> <Clabel> <Crefname> <Dlabel> <Drefname> <PhyMin> <PhyMax>
<steps> <time>
This program starts with PhyMin and sets the controlled
parameter to value between PhyMin and PhyMax in steps.
The program pauses
for time between each step.
After time the value of the control datapoint
and the read datapoint are written to the stdout in E format.
- dbman_host
The host where dbman is running. - Clabel Crefname
The parameter to issue values to. - Dlabel Drefname
The parameter to read values from. - PhyMin
The beginning value to set the control parameter to. - PhyMax
The ending value to set the control parameter to. - steps
The number of steps to divide PhyMin and PhyMax into. - time
The time between steps.
ParTrend csdev1 "BM 01-1" "CC " "FC
01-1" "CR " 20.0 25.0 50 15
Set BM 01-1 from 0 to 125 amps in 50 steps and wait 15 secs between steps.
Read HPB 01-1 MfieldR after every step.
MagScale(1)
is meant to be used for generating tables for BMmngr(8)
.
ParTrend(1)
should be used for general work.
For some reason or another
this program registers with dbman as "MagScale".
$Id:
ParTrend.1,v 1.4 2006/06/07 16:26:53 kitchen Exp $
Table of Contents