These tables are used to validate fields of other tables in the database. These tables should not be modified by the user. The tables will only change if new functionality is added to AccelNET.
Wire Color Key table. This table is used to validate wire colors entered into RPrecord and Trecord color fields. The color value may be used to sort by wire color.
Color name.
An integer value for color name.
Comments field.
This is list of valid wire colors that may be entered into the color fields in the RPrecords and Trecord. All of the entries listed appear in the ColKeys table.
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
None
Shield
The CAMAC interface usually contains one or more power buses. They are used to provide power to drive relays and other such devices. Sometimes the bus is switched to provide interlocking functions. For example, in some machines the tank pressure switch controls power to a bus in the interface. The power from the switched bus is connected to the rotating shaft, gvm power status control, etc. If the tank is under vacuum, power is not applied to the bus. Even if the control system may have told the device to be on, it won't be. The BusKeys table allows the buses to be given names and incorporated in the wire lists.
This table is slated for deprecation/obsolete status and will be replaced by JackRec, but is still in active use.
Bus Name.
An integer value for the bus name. This field is provided in order to allow an arbitrary sort by bus.
Comments field.
This is a list of common entries for RPrecord.Buss. All of the entries listed should appear in the BusKeys table.
No bus connection.
Camac 24v pwr supply.
Interlock Bus 1.
Interlock Bus 2.